Exhaust Wrap

Home >> Motorcycles >> Exhaust Heat Wrap >> Exhaust Wrap

insulation Type: Insulator, keeps heat in
uses: Genset exhaust insulation, Exhaust Pipe Wrap, Header Wrap

Rated To :

Exhaust pipe wrap maintains hotter exhaust gases, decreases the gas density, and that allows the exhaust gas to exit the header and exhaust system faster! Increased exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. To gain full horsepower benefits, be sure to wrap starting at the header pipe next to the cylinder head, and wrap downstream. Exhaust wrap also reduces radiant from your pipe heat by as much as 50% keeping your ride a much cooler one. Using exhaust pipe heat wrap can also reduce heat damage to fairings and keep shocks cooler.

This heat wrap withstand 1200F continuous and 2000F intermittent. This is a no baloney rating, don’t buy a fiberglass or volcanic rock wraps that claim an continuous operating temperature above 1200F, someone is trying to sell you something, not solve a real problem with a real solution. For applications exceeding 1200F continuous use, check out our header pipe wrap. All of our exhaust pipe wraps can be fastened with stainless steel locking tie, hose clamps, or wire.

Our exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Exhaust heat wrap is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Rated for 1200F continuous use, 2000F intermittent
Reduces radiant heat from pipe up to 50%
Increases horsepower
Exhaust header pipe wrap rolls are 1/16 inch thick
May require re-jetting of carburetors in some applications
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling motorcycle exhaust pipe wrap
Exhaust pipe wrap is made in the USA

Please note: It is not advised you pressure wash the exhaust wrap after it is installed.

Motorcycle Exhaust Wrap Instruction Sheet | MSDS | Motorcycle Exhaust Wrap Calculator

Part No.

Description

311025

Exhaust Wrap; 1 Inch Wide by 25 Foot Roll

311050

Exhaust Wrap; 1 Inch Wide by 50 Foot Roll

311100

Exhaust Wrap; 1 Inch Wide by 100 Foot Roll

312015

Exhaust Wrap; 2 Inches Wide by 15 Foot Roll

312025

Exhaust Wrap; 2 Inches Wide by 25 Foot Roll

312050

Exhaust Wrap; 2 Inches Wide by 50 Foot Roll

312100

Exhaust Wrap; 2 Inches Wide by 50 Foot Roll

Reviews

Reviews are not available.Click Here to write your own review.


LIKE US

					Tweet

heatshield insiders:

Become a Heatshield Insider today! Sign up to receive special insider offers on exhaust header wrap, exhaust heat shields, turbo heat shields, new products, technical data, events, shows, and all that is new at Heatshield Products!