Thermaflect Cloth

Home >> Motorcycles >> Fuel Tank and Fairing Heat Shields >> Thermaflect Cloth

insulation Type: Heat shield, reflects radiant heat away
uses: Hood heat shield, Floorboard heat shield, Firewall heat shield, Air box heatshield, DPF heat shield, Intercooler tubing heat shield, Gas tank heat shield

Rated To :

Thermaflect Cloth is a heat shield for the bottom of your fuel tank, air box, fairings, and seat bottom. It prevents your fuel from boiling, stops pre-ignition, prevents critical components of your fuel from evaporating, and prevents vapor lock. This helps to keep your bike performance as crisp as it was when you started the race. You should also use this as a heat shield on your air box, to lower air intake temperatures by shielding radiant heat from your exhaust and shock; this will further improve the efficiency of your motor and create more horsepower. Thermaflect Cloth can also be used as a fairing heat shield, helping to prevent them from melting and ruining paint. It can also be used as a heat shield for the bottom of your seat on your custom cruiser. Thermaflect Cloth in addition to a high mirror finish, it weighs 50% less than similar products. Face the aluminized side toward the source of radiant heat (we recommend a minimum 1” of airspace) to shield heat away. This product withstands 1100F of radiant heat and up to 450F of direct heat. It cuts easily with a pair of scissors, and the high temperature peel and stick adhesive will stick to any clean surface. Bulk rolls of this heat shield cloth are available.

Continuous operating reflective temperature of 1100F, 2000F intermittent
Capable of reducing up to 90 percent of radiant heat
Lowers fuel temperature by as much as 10F
Weighs half as much as similar products
Keeps fuel’s chemical balance in tact
Adhesive sticks most clean surfaces-not recommended for rough/unfinished fiberglass
Capable of reducing up to 90 percent of radiant heat
Bulk rolls and custom widths available, minimums apply
Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
Made in the USA

Please note: It is not advised to pressure wash Thermaflect Cloth. Using Cool Foil Tape to protect the edges will help reduce the amount of damage pressure washing will do to this product.

MSDS

Part No.

Description

710040

Heat shield cloth, .018 36 Inches by 58 Inches

711002

Heat Shield Cloth w/ Adhesive, .018 Inch thick, 24 Inches by 24 Inches

711005

Heat Shield Cloth w/ Adhesive, .018 Inch Thick, 36 Inches by 58 Inches

Reviews

Reviews are not available.Click Here to write your own review.


LIKE US

					Tweet

heatshield insiders:

Become a Heatshield Insider today! Sign up to receive special insider offers on exhaust header wrap, exhaust heat shields, turbo heat shields, new products, technical data, events, shows, and all that is new at Heatshield Products!