HP Felt Mat

Home >> Marine >> Marine Exhaust Insulation >> HP Felt Mat

insulation Type: Insulator and heat shield barrier
uses: Exhaust Pipe Wrap, DPF heat shield, DPF insulation wrap, Genset exhaust insulation, Genset exhaust heat shield, Muffler heat shield

Rated To :

Our HP Felt Mat (formerly Steal Felt Mat) is the perfect high temperature insulation solution for heating issues caused by a diesel particulate trap retro fit, general exhaust heat, genset, turbo wrap, or any repower restoration. This material is a carbon pan based felt designed to take temperatures of 1800°F. The black side of this felt may be used directly on the exhaust system for direct insulation. The versatility of this product also allows it to be used as a heat shield thermal barrier by lining the engine compartment or under side of vehicle and facing the aluminum side towards the exhaust system to stop the radiant heat. To use as a heat shield barrier, attach mechanically with rivets or screws, large washers are also recommended.

Reflective radiant continuous temperature 1100°F aluminum side
Continuous direct contact temperature, 1800°F, HP felt side
Heat shield felt mat is 1/8 inch thick.
May be used as direct insulation on exhaust system
Or face foil side towards heat source to act as a radiant heat shield barrier
Bulk rolls available, minimums required

MSDS | Specification sheet

Part No.

Description

800101

HP Felt Mat with foil; 1/8 inch thick 24 inches by 53 inches

800102

HP Felt Mat with foil; 1/8 inch thick 60 inches by 53 inches

800111

HP Felt Mat with foil; 1/4 inch thick 24 inches by 53 inches

800112

HP Felt Mat with foil; 1/4 inch thick 60 inches by 53 inches

Reviews

Reviews are not available.Click Here to write your own review.


LIKE US

					Tweet

heatshield insiders:

Become a Heatshield Insider today! Sign up to receive special insider offers on exhaust header wrap, exhaust heat shields, turbo heat shields, new products, technical data, events, shows, and all that is new at Heatshield Products!