(800) 750-3978   CONTACT CONNECT  Heat shield  Exhaust wrapHeader wrap
SEARCH     Turbo heat shield
 
Exhaust pipe wrap Header pipe wrap Turbo heat shield Industrial insulation DPF exhaust heat shield Cold air intake heat shield
Heat shield
 

Thermaflect Sleeve Hook and Loop

Thermaflect Sleeve Hook and Loop
 
insulation Type: Radiant heat shield barrier, reflects heat away.
uses: Oil line heat shield sleeve, Brake line heat shield sleeve, Fuel line heat shield, Air box heatshield, Cold Air Intake Heat Shield, Intercooler tubing heat shield
Rated To :Heat shield exhaust header wrap
Shield your wiring, lines, and cables safe from heat. Forget about that old fire silicone sleeving (450°F max); Thermaflect Sleeve™ acts as a thermal barrier capable of reflecting up to 95% of radiant heat away (requires minimum of 1” of airspace). It is excellent to use on your fuel lines, wiring looms, air intake and intercooler pipes. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation and vapor lock. *Weight* there is more; a 3' length our Thermaflect Sleeve™ weighs less than 6" of the old silicone covered stuff of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve™ withstands 1100°F of continuous radiant heat and 500°F direct heat. Also available in sewn seam.


  • Continuous operating reflective temperature of 1100°F, 2000°F intermittent
  • Capable of reducing up to 90% of radiant heat
  • Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
  • Hook and loop seam allows installation without component assembly
  • Also available in a sewn seam.
  • Larger diameters and rolls are available upon special request.

Installation tips:
  • Be sure ends of sleeve are sealed or secured to component you are trying to protect. You can seal the ends using our Thermaflect Tape™, Cool Foil Tape™, Thermal-Tie™, shrink tube, or any mechanical fastener. Securing the ends will ensure no hot air sneaks in behind the sleeve, thus allowing it to work more efficiently.
  • It also functions better if the heat shield sleeve is tight on the component.
  • Face hook and loop seam on the opposite side of the heat source.
Part No. Description
274012 Heat Shield Sleeve; 1/2 Inch ID by 3 Feet Hook and Loop
274013 Heat Shield Sleeve; 1/2 Inch ID by 10 Feet Hook and Loop
274034 Heat Shield Sleeve; 3/4 Inch ID by 3 Feet Hook and Loop
274035 Heat Shield Sleeve; 3/4 Inch ID by 10 Feet Hook and Loop
274100 Heat Shield Sleeve; 1 Inch ID by 3 Feet Hook and Loop
274101 Heat Shield Sleeve; 1 Inch ID by 10 Feet Hook and Loop
274112 Heat Shield Sleeve; 1-1/2 Inch ID by 3 Feet Hook and Loop
274113 Heat Shield Sleeve; 1-1/2 Inch ID by 10 Feet Hook and Loop
274114 Heat Shield Sleeve; 1 Inch ID by 10 Feet
274115 Heat Shield Sleeve; 1-1/4 Inch ID by 10 Feet Hook and Loop
274134 Heat Shield Sleeve; 1-3/4 Inch ID by 3 Feet Hook and Loop
274135 Heat Shield Sleeve; 1-3/4 Inch ID by 10 Feet Hook and Loop
274200 Heat Shield Sleeve; 2 Inch ID by 3 Feet Hook and Loop
274201 Heat Shield Sleeve; 2 Inch ID by 10 Feet Hook and Loop
274212 Heat Shield Sleeve; 2-1/2 Inch ID by 3 Feet Hook and Loop
274213 Heat Shield Sleeve; 2-1/2 Inch ID by 10 Feet Hook and Loop
274214 Heat Shield Sleeve; 2-1/4 Inch ID by 3 Feet Hook and Loop
274215 Heat Shield Sleeve; 2-1/4 Inch ID by 10 Feet Hook and Loop
274234 Heat Shield Sleeve; 2-3/4 Inch ID by 3 Feet Hook and Loop
274235 Heat Shield Sleeve; 2-3/4 Inch ID by 10 Feet Hook and Loop
274300 Heat Shield Sleeve; 3 Inch ID by 3 Feet Hook and Loop
274301 Heat Shield Sleeve; 3 Inch ID by 10 Feet Hook and Loop
274304 Heat Shield Sleeve; 3-1/2 Inch ID by 3 Feet Hook and Loop
274305 Heat Shield Sleeve; 3-1/2 Inch ID by 10 Feet Hook and Loop
274308 Heat Shield Sleeve; 4 Inch ID by 3 Feet Hook and Loop
274309 Heat Shield Sleeve; 4 Inch ID by 10 Feet Hook and Loop
 
Share/Bookmark
Reviews
Reviews are not available.Click Here to write your own review.
 
 
LIKE US
 
      
 
heatshield insiders:
Become a Heatshield Insider today! Sign up to receive special insider offers on exhaust header wrap, exhaust heat shields, turbo heat shields, new products, technical data, events, shows, and all that is new at Heatshield Products!
 
Forgot password
Create New Account

RELATED PRODUCTS:
BUY ONLINE: