Thermaflect™ Shield - Universal/Flexible Heat Shield
Need to keep your vehicles interior cool? Grab this flexible high-performance universal heat shield to protect vital components and stay cool.
- Reflects up to 90% of radiant heat (ASTM F1939 & Mil-C-24929A)
- Should NOT come in direct contact with heat source (needs an air gap)
- Flexible, bends and conforms to almost any shape
- Simple installation, install in minutes!
- Great for air boxes, floor pans, and more
- Made in the USA
Thermaflect™ Shield is a universal flexible heat shield that deflects heat away and is rugged enough to be used for almost any radiant heat application. If used with a 1-inch air gap between the heat source and Thermaflect™ Shield and with good airflow, this heatshield can reflect over 90 percent of radiant heat. We use a 1/4-inch-thick BioCool™ thermal-barrier inner pad sandwiched between heavy-duty foil, bound and sewn together with a stainless steel mesh at the edges. BioCool™ is a non-caustic, non-flammable bio-soluble insulation. It does not cause itching and won’t smoke or smell the first time it is heat-cycled. By binding the edges with this mesh, we created greater flexibility and a more rugged product. This heatshield withstands 1100-F continuous radiant heat, and 500-F direct when in direct contact.
Thermaflect™ Shield is intended for wrapping around air boxes, electrical boxes and air conditioning components or is used to shield radiant heat from catalytic converters, mufflers and DPF, and on the bottom of the floorpans. Thermaflect™ Shield may be fastened with Thermal-Tie™, safety wire, screws or rivets.
WARNING: This product can expose you to chromium, a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Q. Can I put Thermaflect Shield directly on the exhaust?
A. No, Thermaflect Shield is a radiant heat barrier it is engineered to shield heat that is 1" away from the shield.
Q. Why don't you recommend a high temperature spray adhesive for Thermaflect Shield?
A. A high temperature spray adhesive would work just fine. Thermaflect Shield knocks heat down enough that is falls well within the temperature parameters of 3M's Super 77 or Super Trim adhesive spray