Gold Turbo Heat Shield with RugGold™ Technology

Lava Rock Turbo Heat Shield

More Views

1800°F

982°C

CONTINUOUS

2200°F

1204°C

Intermittent

FEATURES:

  • Capable of reducing up to 60% of under hood heat

  • Does not conduct heat like all metal turbo shields

  • Reduces turbo lag, lowers under hood temperatures

  • Custom fit installs in minutes

  • Custom shields available, will require housing to make prototype

  • Made in the USA

Part No Description
300073 T3 Turbos
300074 T4 Turbos
300076 T6 Turbos
300078 T2 Turbos

Heatshield Products has added the Midas touch to your next turbo heat shield. Born our #RaceTested turbo shields we have combined that formula with our exclusive RugGold™ technology. This textile based heat shield reduces underhood temperatures far greater than an all metal heat shield. All metal heat shields conduct heat from the hot side metal to the cold side metal. Our GTS creates a “thermal break” from the turbine offering a cooler cold side temperature. This reduces underhood temperatures far greater than a metal turbo heat shield.

In addition to lowering underhood temperatures it also increases the exhaust gas temperatures. Higher EGT’s allow the turbine wheel to spin faster. The retained heat also keeps the turbo spooled up, this is extremely helpful when pedaling down the track or launching quicker out of a corner.

You can keep your Gold Turbo Shield looking like new by using a diluted cleaner solution like Simple Green. Simply wipe on and wipe off dry. Installation is easy with the custom fit and included stainless steel springs.

Available May 2017

Turbo Shield Installation Tips:

  • Wrap around turbo, and use included stainless steel springs on anchor hooks
  • Use a pair of needle nose pliers to help your stretch springs to hooks

MSDS | Specification Sheet | Brochure


Insulation type: Insulator, retains heat

Base material: silica, ceramic, and fiberglass

Color: RugGold™

Q. My turbo shield is smoking after it is installed, will it catch on fire?

A. No, smoking is normal. the material used are non combustible and the smoke you see are binder burning off from the textiles used, this is completely normal. The smoking will stop after a short period of time. It can last as little as a few minutes to a few days, it depends on how hot your turbo gets.


Q. I have installed my turbo shield, but i still can't touch my turbo is it not working?

A. Yes the shield is functioning just fine. The shield reduces the amount of radiant heat, but it can't always knock the temperature down to where it is safe to the touch. For example, say your turbo is running at 1000°F, and you were able to knock the temperature down to 500°F, you certainly wouldn't put your hand in an oven at 500°F, so please don't touch the turbo shield either!

Use gold Turbo Heat Shields on:

  • Turbine (hot side) turbo housings

heatshieldproducts (844) 723-2665