Industrial Stainless Locking Ties

Industrial Stainless Locking Ties

More Views

1800°F

982°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Continuous operating temperature of 1800°F

  • 316 stainless steel locking ties

  • 0.010" thick

  • The heavy duty tie features 45% more gripping power

  • Great for heavy duty applications

  • Made in the USA

Part No Description
351001 5/16 w x 8 in 8 Pack
351002 5/16 w x 8 in bag of 50
351003 5/16 w x 10 in 6 Pack
351004 5/16 w x 10 in bag of 50
351005 5/16 w x 14 in 4 Pack
351006 5/16 w x 14 in bag of 50
351007 5/16 w x 20 in 6 Pack
351008 5/16 w x 20 in bag of 50
351012 5/16 w x 33 in 2 Pack
351013 5/16 w x 33 in bag of 50

Industrial strength locking ties are the easiest and best way to fasten any type of high temperature insulation on an exhaust system. Stainless steel zip ties can also be used in any application where high strength fastener is needed. Easy to use; no bands or buckles required! Simply pull the tail end through the head and tighten, just like plastic wire ties. There are no sharp edges and are easy to handle. The low profile makes stainless cable ties ideal for any tight fit application. 316 stainless steel tie, with 45% more gripping power than most ties available on the market!. Thermal Ties have a thickness of .010-inch.

Required equipment: gloves, needle nose pliers, and diagonal pliers

  • Identify the tail and heat of the stainless steel locking tie (Figure 1)
  • Wrap tie around components to be secured, and push tail through the head (Figure 2)
  • Pull tail through head (Figure 3)
  • Use needle nose pliers to coil or wind the tie into itself (Figure 4)
  • Use diagonal pliers to cut of excess (Figure 5)

Install Stainless Locking Tie

heatshieldproducts (844) 723-2665