Black Carbon Fiber Look Motorcycle Exhaust Wrap

Carbon Fiber Exhaust Wrap

  • Images
  • Videos

1350°F

732°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Special weave makes it easier to wrap around bends

  • Has a cool carbon fiber look

  • Reduces pipe temperature up to 50%

  • All rolls of exhaust wrap are 1/16" thick

  • Made in USA

Part No Description
380027 1 in x 25 ft Carbon Pipe Wrap
380028 1 in x 50 ft Carbon fiber pipe wrap
380030 2 in x 25 ft Carbon fiber pipe wrap
380032 2 in x 50 ft Carbon fiber pipe wrap

Stand out in the crowd; give your motorcycle muffler wrap that real carbon fiber look. Cobra Skin exhaust muffler wrap features a special weave that gives it a carbon fiber look and make it easier to install around bends in header pipes compared to conventional exhaust wraps. The cool HPTC technology allows carbon fiber motorcycle exhaust wrap to remain flexible and strong even at 1350-degrees Fahrenheit. It also gives our carbon fiber exhaust wrap that deep black color, no goofy sprays required! Using motorcycle exhaust wrap maintains more heat in the exhaust system; this makes exhaust gases hotter, that allows the exhaust gas to exit the system faster! This increases exhaust scavenging, pulling intake and exhaust gases through the system faster, helping to lower intake temperatures: that equals more horsepower. In some cases, the scavenging is so much, you might need to re-jet your carbs. Cobra Skin wrap also reduces radiant heat damage and can lower exhaust pipe heat by as much as 50%. The lower exhaust heat can make you, the rider more comfortable, suffer less fatigue, and allow you to enjoy your ride longer. Cobra Skin exhaust heat wrap can withstand a real world rating 1350-degrees Fahrenheit, continuous and 2000-degrees Fahrenheit intermittent.

Our carbon fiber exhaust wrap is asbestos free and is made from a base non respirable high quality fiberglass yarn. The Cobra Skin carbon fiber exhaust wrap is noncombustible it is also water and fungus resistant. Check out our black motorcycle exhaust wrap as well!

How much Cobra Exhaust Wrap do you need? Click here for our exhaust wrap calculator


Download Exhaust Wrap Instruction Sheet


MSDS | Specification Sheet | Brochure | Brochure (printer friendly)


Insulation type: Insulator, retains heat in.

Material: Fiberglass, proprietary thermal coating


 

Q. Why does your exhaust wrap have a lower temperature rating than (Brand) *** or *********?

Fiberglass has an operational/service temperature of 1000°F. With coatings this can be improved to 1200°F, and without own proprietary HPTC, it can be improved to 1350°F. We acknowledge advertising our fiberglass wraps to have a lower temperature rating doesn’t help us in sell over another brand. We strive to be honest in our operational and peak temperatures. While it is true the fiberglass wraps can sustain a flash temperature of 2000°F, this is for less than 30 seconds. The designed sustained temperature for fiberglass wraps with traditional coatings is 1200°F, with the proprietary coating for our Premium and Cobra Wraps, we can extend it to 1350°F.


 Q. Why don’t you sell a spray on silicone coating for your wrap?

We are not in the silicone spray business. That being said, even if we were, we wouldn’t sell a silicone spray to begin with good quality wraps don’t need a silicone coating to work. While coating the wraps is not necessary, we do understand the desire to upkeep a certain cosmetic appearance, we can respect that. Instead of using a silicone spray (silicone is good for about 450°F continuous, sprayable silicone is good for 300F max) we would recommend hitting a local auto parts store. Walk in and grab yourself a can of exhaust paint in your desired color. Exhaust paint is a ceramic based paint (usually rated between 1500°F and 2000°F), it will last a lot longer than a silicone paint and work better too. Look for a brand like VHT or Dupli Color.


 Q. People say wrapping your exhaust pipes causes them to rust, is this true?

Short answer, no. Fiberglass, basalt (lava Wrap), and silica (Inferno Wrap) are all naturally water resistant fibers. This means, they will resist and repel water. A properly installed wrap will actually prevent less moisture from touching the exhaust pipe. Pipes that are completely saturated, like in a flood or extreme driving condition would see some water getting through to the pipe. However the increased exhaust gas temperatures would cause that moisture to evaporate relatively quickly.


 Q. Why does my exhaust wrap smoke when it is new? Is this bad for me to breath in?

Short answer, no. The smoke you see is a starch, the starch goes on the fibers when the fibers are still raw. This is to aid in the knitting process. The smoke you are seeing is the starch burning off when you first couple of heat cycles the motor. While it isn't harmful to breath in, we wouldn't advise it, it stinks - don't hot box in your garage!


 Q. I have heard soaking the wrap when I install it will cause it to shrink and fit the pipe better, is this true?

Short answer, no. We are dealing with fiberglass, basalt, or silica fibers here, not cotton. These fibers don’t shrink like some of your clothes would. Soaking may cause a tighter fit because wetting the wrap significantly reduces the amount of fibers. With fewer fibers floating around, you are less itchy, that allows you to take your time and get the wrap nice and tight. Patience is key when wrapping any pipes. Wetting it will also aid in causing the wrap to “stick” itself better when coiling around a pipe, again aiding in installation, but technically it does not shrink to fit the pipe. Soaking is not necessary, you can dampen the wrap with a spray bottle, but soaking is not necessary.

Use Cobra Skin Exhaust Wrap on:

  • Header Pipe
  • Exhaust pipe
  • Under metal exhaust heat shield
  • Muffler
  • Silencer

heatshieldproducts (844) 723-2665