Exhaust Pipe Wrap for Motorcycles, UTV's, and More

Moto Exhaust Wrap

More Views

1200°F

649°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Reduces radiant heat from pipe up to 50%

  • Increases horsepower

  • Exhaust header pipe wrap rolls are 1/16 inch thick

  • May require re-jetting of carburetors in some applications

  • Exhaust pipe wrap is made in the USA

Part No Description
313027 1 in x 25 ft Roll
313028 1 in x 50 ft Roll
313030 2 in x 25 ft Roll
313032 2 in x 50 ft Roll

Exhaust pipe wrap maintains hotter exhaust gases, decreases the gas density, and that allows the exhaust gas to exit the header and exhaust system faster! Increased exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. To gain full horsepower benefits, be sure to wrap starting at the header pipe next to the cylinder head, and wrap downstream. Exhaust wrap also reduces radiant from your pipe heat by as much as 50 percent keeping your ride a much cooler one. Using exhaust pipe heat wrap can also reduce heat damage to fairings and keep shocks cooler.

This heat wrap withstand 1200-degrees Fahrenheit continuous and 2000-degrees Fahrenheit intermittent. This is a no baloney rating, don’t buy a fiberglass or volcanic rock wraps that claim an continuous operating temperature above 1200-degrees Fahrenheit , someone is trying to sell you something, not solve a real problem with a real solution. For applications exceeding 1200-degrees Fahrenheit continuous use, check out our header pipe wrap. All of our exhaust pipe wraps can be fastened with stainless steel locking tie, hose clamps, or wire.

Our exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Exhaust heat wrap is also water and fungus resistant. Always wear gloves, safety glasses and dust mask when handling this product, long sleeves are also recommended.

How much motorcycle exhaust wrap do you need for your pipes? Click here for our exhaust wrap calculator


Download Exhaust Wrap Instruction Sheet


MSDS | Specification Sheet | Brochure | Brochure (printer friendly)


Insulation type: Insulator, retains heat in

Material: Fiberglass, Vermiculite thermal coating

Header and Exhaust Wrap Calculator

DISCLAIMER:

This calculator is a tool to estimate how much exhaust header wrap you will need for your headers, downpipe, or exhaust system. Calculations are a guide only! Actual usage will vary depending upon installation. Tighter installation of exhaust wrap on the pipe results in smaller header wrap needed.

GUIDE FOR CALCULATOR USAGE:

All fractions should be in decimal form:
  • 1/8 should be 0.125
  • ¼ should be 0.250
  • ½ should be 0.500
  • ¾ should be 0.750
  • 7/8 should be 0.875

RECOMMENDED WIDTHS:

  • ¾"- 2" pipe OD use 1" wide wrap
  • 1¾"- 4" pipe OD use 2" wide wrap
  • 3"- 4" pipe OD use 2" or 3" wide wrap
  • 4"- 5" pipe OD use 2", 3" or 4" wide wrap
  • 5"+ pipe OD use 3", 4" or 6" wide wrap

SELECT OVERLAP OF EXHAUST WRAP:

¼" Overlap is recommended for automotive applications, a 50% overlap is recommended for all motorcycle, UTV, kart, marine, heavy duty and industrial applications.

ENTER EXHAUST COMPONENT DIMENSIONS:

* Pipe diameter in inches
* Pipe length in feet
Number of bends less than 45°
Number of bends greater than 45°
* Required field

Results

Feet of 1" exhaust wrap needed:
25' rolls 50' rolls 100' rolls
Feet of 2" exhaust wrap needed:
15' rolls 25' rolls 50' rolls 100' rolls
Feet of 3" exhaust wrap needed:
100' rolls
Feet of 4" exhaust wrap needed:
100' rolls
Feet of 6" exhaust wrap needed:
100' rolls

Q. Why does your exhaust wrap have a lower temperature rating than (Brand) *** or *********?

Fiberglass has an operational/service temperature of 1000°F. With coatings this can be improved to 1200°F, and without own proprietary HPTC, it can be improved to 1350°F. We acknowledge advertising our fiberglass wraps to have a lower temperature rating doesn’t help us in sell over another brand. We strive to be honest in our operational and peak temperatures. While it is true the fiberglass wraps can sustain a flash temperature of 2000°F, this is for less than 30 seconds. The designed sustained temperature for fiberglass wraps with traditional coatings is 1200°F like vermiculite or graphite, with the proprietary coating for our Premium and Cobra Wraps, we can extend it to 1350°F.


Q. Why don’t you sell a spray on silicone coating for your wrap?

We are not in the silicone spray business. That being said, even if we were, we wouldn’t sell a silicone spray to begin with good quality wraps don’t need a silicone coating to work. While coating the wraps is not necessary, we do understand the desire to upkeep a certain cosmetic appearance, we can respect that. Instead of using a silicone spray (silicone is good for about 450°F continuous, sprayable silicone is good for 300F max) we would recommend hitting a local auto parts store. Walk in and grab yourself a can of exhaust paint in your desired color. Exhaust paint is a ceramic based paint (usually rated between 1500°F and 2000°F), it will last a lot longer than a silicone paint and work better too. Look for a brand like VHT or Dupli Color.


Q. People say wrapping your exhaust pipes causes them to rust, is this true?

A. No, fiberglass, basalt (lava Wrap), and silica (Inferno Wrap) are all naturally water resistant fibers. This means, they will resist and repel water. A properly installed wrap will actually prevent less moisture from touching the exhaust pipe. Pipes that are completely saturated, like in a flood or extreme driving condition would see some water getting through to the pipe.


Q. Why does my exhaust wrap smoke when it is new? Is this bad for me to breath in?

A. No, the smoke you see is a starch (often called a binder), the starch goes on the fibers when the fibers are still raw. This is to aid in the knitting process. The smoke you are seeing is the starch burning off during the first couple of heat cycles the motor. While it isn't harmful to breath in, we suggest avoiding it if you can, it stinks - don't hot box in your garage!


Q. I have heard soaking the wrap when I install it will cause it to shrink and fit the pipe better, is this true?

A. No, we are dealing with fiberglass, basalt, or silica fibers here, not cotton. These fibers don’t shrink like some of your clothes would. Soaking may cause a tighter fit because wetting the wrap significantly reduces the amount of fibers. With fewer fibers floating around, you are less itchy, that allows you to take your time and get the wrap nice and tight. Patience is key when wrapping any pipes. Wetting it will also aid in causing the wrap to “stick” itself better when coiling around a pipe, again aiding in installation, but technically it does not shrink to fit the pipe. Soaking is not necessary, you can dampen the wrap with a spray bottle, but soaking is not necessary.

Use PowerSports Exhaust Wrap on:

  • Header pipe
  • UTV pipes
  • Quad pipes
  • Muffler
  • Silencer

heatshieldproducts (844) 723-2665