Premium Header Pipe Exhaust Wrap

Premium Exhaust Wrap

More Views








  • Rated for 1350°F continuous use, 2000°F intermittent

  • Reduces heat from pipes up to 50%

  • May require re-jetting on carburetor applications

  • Increases horsepower

  • All rolls of exhaust wrap are 1/16 inch thick

  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product

  • Made in the USA

Part No Description
301002 1 in x 25 ft Roll - White
301004 1 in x 50 ft Roll - White
302001 2 in x 15 ft Roll - White
302002 2 in x 25 ft Roll - White
302006 2 in x 50 ft Roll - White
307014 1 in x 50 ft Roll - Black
307021 2 in x 25 ft Roll - Black
307024 2 in x 50 ft Roll - Black

Heatshield Products premium-grade exhaust header wraps feature a tighter weave than any other fiberglass thermal heat wraps on the planet. This tighter weave retains more heat and makes our exhaust wrap less susceptible to fraying. What does that mean for your vehicle? Better heat performance and longer life!

In addition to the tightest weave, Heatshield Products premium exhaust thermal heat wraps feature our HPTC coating. Other brands of header wraps use fiberglass, which will become weak and brittle at 1,000 degrees F, while coatings like graphite or vermiculite will extend the base temp to 1,200 degrees F, but the fibers will still become brittle. Our HPTC coating allows our Premium Exhaust Wrap to operate at 1,350 degrees F continuously and 2,000 degrees F intermittently.

Our coated fibers remain flexible at 1,350 degrees F, so the wrap can expand and contract with the metal of the exhaust system, ensuring long-term maximum heat retention and longer life. No more brittle wrap turning into powder and falling off your pipes! The improved flexibility and strength give the Premium Exhaust Wrap increased abrasion-resistance, even at 1,350 degrees F. It frays less when cutting and installing and has fewer loose fibers. The HPTC coating is deep black and stays deep black after it has been heat-cycled. HPTC coating is also available in bright white, an industry-first that creates an old-school hot rod look.

How much Premium Exhaust Wrap do you need for your motorcycle? Click here for our exhaust wrap calculator

Download Exhaust Wrap Instruction Sheet

MSDS | Specification Sheet | Brochure | Brochure (printer friendly)

Insulation type: Insulator, retains heat in

Material: Fiberglass, proprietary thermal coating

This calculator is a tool to estimate how much exhaust header wrap you will need for your headers, downpipe, or exhaust system. Calculations are a guide only! Actual usage will vary depending upon installation. Tighter installation of exhaust wrap on the pipe results in smaller header wrap needed.

All fractions should be in decimal form, for example:

  • 1/8 should be 0.125
  • ¼ should be 0.250
  • ½ should be 0.500
  • ¾ should be 0.750
  • 7/8 should be 0.875

Please Select Preferred Wrap Overlap

Quarter inch overlap is recommended for high performance and racing applications, a 50% overlap is recommended for most stock applications.

Enter Exhaust Pipe Dimensions

* Pipe diameter in inches
* Pipe length in feet
Number of bends less than 45°
Number of bends greater than 45°
* Required field

Q. Why does your exhaust wrap have a lower temperature rating than (Brand) *** or *********?

Fiberglass has an operational/service temperature of 1000°F. With coatings this can be improved to 1200°F, and without own proprietary HPTC, it can be improved to 1350°F. We acknowledge advertising our fiberglass wraps to have a lower temperature rating doesn’t help us in sell over another brand. We strive to be honest in our operational and peak temperatures. While it is true the fiberglass wraps can sustain a flash temperature of 2000°F, this is for less than 30 seconds. The designed sustained temperature for fiberglass wraps with traditional coatings is 1200°F like vermiculite or graphite, with the proprietary coating for our Premium and Cobra Wraps, we can extend it to 1350°F.

Q. Why don’t you sell a spray on silicone coating for your wrap?

We are not in the silicone spray business. That being said, even if we were, we wouldn’t sell a silicone spray to begin with good quality wraps don’t need a silicone coating to work. While coating the wraps is not necessary, we do understand the desire to upkeep a certain cosmetic appearance, we can respect that. Instead of using a silicone spray (silicone is good for about 450°F continuous, sprayable silicone is good for 300F max) we would recommend hitting a local auto parts store. Walk in and grab yourself a can of exhaust paint in your desired color. Exhaust paint is a ceramic based paint (usually rated between 1500°F and 2000°F), it will last a lot longer than a silicone paint and work better too. Look for a brand like VHT or Dupli Color.

Use Premium Exhaust Wrap on:

  • Header pipe
  • Under exhaust heat shield
  • Muffler
  • Silencer


heatshieldproducts (844) 723-2665