Premium Marine Exhaust Wrap

Premium Marine Exhaust Wrap

More Views

1350°F

732°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Rated for1350°F continuous use, 2000°F intermittent

  • Reduces engine room temperatures up to 50%

  • All rolls of exhaust wrap are 1/16" thick

  • Premium Exhaust Wrap is made in the USA

Part No Description
HD30012 1 in x 50 ft Roll
HD30022 2 in x 50 ft Roll
HD30023 2 in x 100 ft Roll
HD30043 4 in x 100 ft Roll
HD30063 6 in x 100 ft Roll

The premium marine exhaust heat shield wrap maintains hotter exhaust and header gases, decreases the gas density, and that allows the exhaust gas to exit the system faster! This increases exhaust scavenging, pulling intake and exhaust gases through the system faster, helping to lower intake temperatures: that equals more horsepower. Our premium exhaust heat wrap also reduces radiant heat damage and can lower engine room temperatures by as much as 40%. Lower overall room temperatures can further reduce your intake temperatures. Our premium grade exhaust heat wrap features a tighter weave than industry standard marine exhaust wraps, thus retaining more heat, fraying less, and offering a longer lifespan. Our marine exhaust wrap can withstand a real world rating 1350°F continuous and 2000°F intermittent. Premium exhaust heat shield wrap can be fastened with Thermal-Tie, hose clamps, or wire.

Our exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Premium exhaust wrap is noncombustible. It is also water and fungus resistant

How much Premium Exhaust Wrap do you need for your vessel? Click here and select the 50/50 overlap option on our exhaust wrap calculator


Download Exhaust Wrap Instruction Sheet


SDS | Specification Sheet | Brochure


Insulation type: Insulator, retains heat in

Material: Fiberglass, proprietary thermal coating

This calculator is a tool to estimate how much exhaust header wrap you will need for your headers, downpipe, or exhaust system. Calculations are a guide only! Actual usage will vary depending upon installation. Tighter installation of exhaust wrap on the pipe results in smaller header wrap needed.

All fractions should be in decimal form, for example:

  • 1/8 should be 0.125
  • 1/4 should be 0.250
  • 1/2 should be 0.500
  • 3/4 should be 0.750
  • 7/8 should be 0.875


Please Select Preferred Wrap Overlap

Quarter inch overlap is recommended for high performance and racing applications, a 50% overlap is recommended for most stock applications.


Enter Exhaust Pipe Dimensions

* Pipe diameter in inches
* Pipe length in feet
Number of bends less than 45°
Number of bends greater than 45°
* Required field

Q. Can i double wrap premium marine exhaust wrap?

A. Yes, you can use a double wrap on most marine applications

heatshieldproducts (844) 723-2665