Component Specific Heat Shields

Using a heat shield on specific components of your race car or daily drivers can offer greater performance an reliabilty. Heatshield Products brought the original starter shield to the market and we have been pursuing more innovation and high quality compoenet heat shield insulation ever since. Make your next trip to the track faster and more reliable with heatshield Products. If you want to see what the other guys will be copying in 6 months you in the right place!

10 Item(s)

  1. I-M Shield

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Increase horsepower and torque by simply sticking an I-M Shield to the bottom of your intake manifold

    • The best dollar per RWHP around

    • Withstands 1100F radiant continuous

    • Adhesive good for 300F

    • Lowers intake temperatures

    • Made in the USA

    Learn More
  2. Catch Can Heat Shield

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    The Catch Can Shield™ uses a specially designed, heat-resistant self-adhesive, so no clamps are needed for installation
    • Keeps the catch can cool so oil vapor will fall out of suspension faster

    • Helps reduce amount of oil vapor ingested into engine through the intake PCV system

    • Reflects up to 90 percent of radiant heat

    Learn More
  3. Lava Stack Sack

    1800°F

    982°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Lava Stack Sack™ looks cool and keeps water and debris from falling down the stack on your diesel truck.

    • Protects stacks from debris, rain, weather in between runs

    • Continuous direct contact temperature 1800°F

    • Soft HP Felt won't scratch most chrome stacks

    • Won’t melt like vinyl stack caps

    • Remove Lava Stack Sack before turning engine on

    • Adjustable Velcro strap for tight fit

    • Made in the USA

    Learn More
  4. Lava Oil Filter Heat Shield

    1200°F

    649°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Lava Oil Filter Shield protects the oil filter from ambient heat and road debris.
    • Special design allows for easy install and removal for reuse after oil changes

    • Includes magnets which holds the shield in place and traps metal debris in the filter

    • Water, oil and solvent resistant

    • Made in the USA

    Learn More
  5. Lava Starter Shield

    1200F

    649°C

    CONTINUOUS

    2000F

    1093°C

    Intermittent

    Heatshield Products Lava Starter Shield™ is specially engineered to protect the engine starter and starter solenoids from damaging ambient heat.
    • Protects starter motor and solenoid from damaging heat

    • Patented Heatshield thermal barrier technology withstands constant temps up to 1200F and short-term exposure to 2000F

    • Installs in minutes, typically without requiring starter removal

    • Naturally water, chemical and acid resistant

    • Made in the USA

    Learn More
  6. Lava Motor Mount Shields

    1200°F

    649°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Lava Motor Mount Shields™ wrap around any factory or aftermarket motor mounts, creating a massive thermal and acoustic barrier that protects the mounts from engine and exhaust heat, along with other ambient elements that can reduce the longevity of the mounts.
    • Protects rubber, polyurethane and polygraphite mounts from heat, water, chemical and acid

    • Easy to install; fits over nearly any motor mount

    • Made in the USA

    Learn More
  7. HP Starter Shield

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    HP Starter Shield™ prevents starter failure caused by excessive heat exposure. Using an HP Starter Shield™ also protects the solenoid and starter from starter heat lock.

    • Prevents starter heat soak so you are not stranded

    • Easy installation, starter removal is not necessary

    • Made in the USA

    Learn More
  8. HP Manifold Shield

    1800°F

    982°C

    CONTINUOUS

    2200°F

    1204°C

    Intermittent

    Heatshield Products Manifold Shield is designed to keep heat inside your exhaust and turbo manifold to increase turbo performance and horsepower

    • Continuous operating temperature of 1800°F, 2200°F intermittent

    • Capable of reducing up to 60% of radiant heat

    • Reduces turbo lag, improves turbo performance

    • Custom fit, installs in minutes

    • Custom manifold jackets available, 4-6 week lead time, minimums and pattern design fees may apply

    • Made in the USA

    Learn More
  9. FR Shields

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    FR Shields™ prevent radiant heat from soaking the fuel rails and increasing the risk of vapor lock, while also keeping the fuel cooler and increasing power

    • Withstands 1100°F (590°C) continuous radiant heat, 500°F (260°C) direct

    • Reduces fuel temperatures

    • Helps prevent pre-ignition

    • Easy to install

    • Custom shields available, requires fuel rail to make prototype

    • Made in the USA

    Learn More
  10. HP Stack Sack

    1800°F

    982°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    HP Stack Sack™ keeps water and debris from falling down the stack on your diesel truck.

    • Protects stacks from debris, rain, weather in between runs

    • Continuous direct contact temperature 1800°F

    • Soft HP Felt won't scratch most chrome stacks

    • Won’t melt like vinyl stack caps

    • Remove Stack Sack before turning engine on

    • Adjustable Velcro strap for tight fit

    • Made in the USA

    Learn More

10 Item(s)

Automotive heat shields for specific vehicle components for improved reliability, efficiency and performance. Our automotive thermal insulation covers air intake shields, fuel rails, starter motors, distributors, fuel jugs, and drums.

Intake Manifold Heat Shield – Out Instant-Muscle Shield is the cheapest horsepower money can buy. With proven gains of up to 20 RWHP, it is too good to pass up. I-M shields work for any V6, V8, or boxer configuration motors.

Starter Heat Shield – An overheated starter can stop you right in your tracks. Placing a heat shield on your starter can prevent the starter from overheating. This prevents the solenoid from locking you up an enables you to get moving.

Cold Air Intake –Aftermarket kits may improve flow but some are made of aluminum – and that conducts heat. Even composite factory or aftermarket intakes conduct heat. Well it is time to turn that air intake into a real cold air intake with our CIS kits.

Motor Mount Shield – Soft rubber or hydraulic engine mounts work great at reducing vibration, but they are subject to heat damage. Heat can dry them out and cause them to fail prematurely. Out Motor mount automotive heat shields enable you to keep the soft mounts without worrying about engine or exhaust heat damage.

Fuel Rail Heat Shield – We all know how much keeping fuel is going into your engine. That is why you see so many people using ice on their fuel systems to keep it cool. Our fuel rail heat shield kit can drop fuel temps by as much as 8 degrees Fahrenheit.

Exhaust Stack Heat Shield – Looking for a weather cap for your diesel rig right after that dyno run? Grab Stack Sack, it is a slid on high temperature cap that won’t scratch your stacks. They can also prevent your turbo from spinning while you tow your rig or equipment when not in use.

Whether you are looking for improved performance or improved reliability, we have the component heat shield you need!

heatshieldproducts (844) 723-2665