Header Armor™ - Header and Manifold Heat Shield

Features:

A header manifold heat shield can significantly reduce under-hood temperatures and improve exhaust gas flow.

  • Easy to install on headers and manifolds
  • Exclusive BioCool™ technology – bio-soluble silica insulation
  • Compliant with most header manufacturer's warranties
  • Outperforms metal factory manifold shields
  • Made in the USA
1800°F 982℃ CONTINUOUS
2200°F 1204℃ Intermittent
Sku Description
177004 1/4 thk x 18 x 24 in w/ wire
177005 1/4 thk x 18 x 24 in (x2) w/ wire
177006 1/4 thk x 11 x 14 in (x2) w/ wire (V6 & Jeep kit)
177009 1/4 thk x 12 x 36 in w/ wire I-6 cyl kit (4.0L Jeep)
177014 1/2 thk x 18 x 24 in w/ wire
177015 1/2 thk x 18 x 24 in (x2) w/ wire
177024 1/4 thk x 18 x 24 in w/ 20 anchors
177025 1/4 thk x 18 x 24 in (x2) w/ 40 anchors
177031 1/2 thk x 18 x 24 in w/20 anchors
177032 1/2 thk x 18 x 24 in (x2) w/40 anchors
Rating:
97%

Exhaust manifold heat shield can reduce under hood temperatures up to 60 percent, lower air intake temperatures and create more horsepower. Header Armor™ keeps you cool at the track or on the street with the easiest to install and longest lasting heat shield blanket available for your headers Header Armor from Heatshield Products.

The abrasion-resistant Header Armor cuts effortlessly with heavy-duty scissors, making it simple to wrap around the headers. Removal of the headers is not necessary for installation on many vehicles. The exclusive BioCool™ insulation can withstand a continuous 1800-F with intermittent spikes of 2200-F, and it lasts longer than other exhaust wraps. It is a bio-soluble high temperature insulation that offers little to no smoke after it has been installed.

In addition to being abrasion-resistant, Header Armor™ has an aluminum layer that rejects chemicals. Because it does not completely wrap the entire header, it is compliant with most header manufacturers’ warranties. Kits are available for single headers and a pair of headers, and all kits include a small spool of Inconel HP Tie Wire to secure this header heat shield in place. We also recommend using the 1/2 inch thick kits for forced induction and racing applications.

Wrapping headers with a high-efficiency heat blanket keeps heat in the exhaust system, moving it out of the engine compartment. This lowers under hood temperatures, helping with overall engine cooling and transferring less heat to the passenger compartment through the firewall. Header Armor also results in hotter and faster-flowing exhaust gases that create a scavenging effect to pull intake gases through the system quicker. This lowers intake temperatures further, resulting in more power.

WARNING: This product can expose you to chromium, a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov

Write Your Own Review
You're reviewing:Header Armor™
Your Rating
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.