Sticky Shield: The Only All-In-One Self-Adhesive Heat Shield Material You’ll Ever Need
Heatshield Products Sticky Shield is the number one thermal barrier for deflecting heat away from a surface. Thanks to its Kool Core™ insulation thermal barrier material, it can handle up to 1100 degrees F continuous heat.
Sticky Shield is so efficient it deflects up to 90 percent of radiant heat with just one inch or more of air space between HP Sticky Shield and the radiant heat source.
The self-adhesive Heat Shield material of Sticky Shield can easily be cut and shaped to cover curved and angled surfaces, and built-in high-temperature adhesive backing makes installation easy for even novice DIY’ers.
Peel And Stick Heat Shield
During installation, there is one aspect of Sticky Shield that can prove to be a tad problematic and/or frustrating. Covering the high-temp adhesive on the back of Sticky Shield is a protective backing.
Peeling this backing material away can be a challenge, but you can remove it easily and quickly with our latest installation tech tip, so it doesn’t slow down your installation.
Follow along as we show you how, and you can watch a video of the process on the Heatshield Products YouTube channel.
Quick Tips To Peel And Stick Adhesive Backed Heat Shield
Here are a few easy and quick tips to peel HP Sticky Shield:
Sticky™ Shield is a versatile thermal barrier material that can deflect up to 90% of radiant heat away from whatever it’s protective with just one inch of air space between it and the heat source. Its specially formulated Kool CoreTM insulation allows it to withstand up to 1100 degrees F radiant heat, along with its 3-mil thick aluminum outer sheeting. Its adhesive backing makes installation on almost any clean surface a breeze, but removing the protective covering on the adhesive can be frustrating
The way to tell if you’re pulling the protective covering off correctly is if the adhesive backing surface is smooth and shiny. If you see any fibers coming up, you’ve pulled the adhesive backing off the Kool CoreTM insulation. The simple trick to peel the covering off effortlessly, use the tip of a sharp razor knife. Take the tip and in one corner pointing towards the outside of the Sticky™ Shield insert the tip of the razor just enough to puncture the protective covering. Then use the tip of the blade to pull the covering back.
It’s as simple as that. The adhesive backing on Sticky™ Shield is shiny and smooth, with no fibrous material visible. Sticky™ Shield’s adhesive backing will stick to almost any clean surface, though not recommended for unfinished fiberglass or carbon fiber.
Looking to buy a reliable industrial sticky shield? Look no further than Heatshield Products! They have sticky shields that can easily withstand 1100 degrees F heat and deflect 90% heat. Also, you can clean them after installation. Not just sticky shield, you can buy other Heatshield Products online or locally as well. For more info, visit our website or contact us directly!
