Fire Shield Sleeve

Fire Shield Sleeve

  • Images
  • Videos

500°F

260°C

CONTINUOUS

900°F

482°C

Intermittent

FEATURES:

  • Silicone layer can be cleaned and protects against abrasion

  • Helps to prevent vapor lock, protects wires from melting

  • Reduces and dissipates heat

  • Made in the USA

Part No Description
210010 3/8-id x 3 ft Red
210011 3/8-id x 10 ft Red
210012 1/2-id x 3 ft Red
210013 1/2-id x 10 ft Red
210014 3/4-id x 3 ft Red
210015 3/4-id x 10 ft Red
210016 1in id x 3 ft Red
210017 1in id x 10 ft Red
210018 1-1/4 id x 3 ft Red
210019 1-1/4 id x 10 ft Red
210020 1-1/2 id x 3 ft Red
210021 1-1/2 id x 10 ft Red
210040 3/8-id x 3 ft Black
210041 3/8-id x 10 ft Black
210042 1/2-id x 3 ft Black
210043 1/2-id x 10 ft Black
210044 3/4-id x 3 ft Black
210045 3/4-id x 10 ft Black
210046 1in id x 3 ft Black
210047 1in id x 10 ft Black
210048 1-1/4 id x 3 ft Black
210049 1-1/4 id x 10 ft Black
210050 1-1/2 id x 3 ft Black
210051 1-1/2 id x 10 ft Black
210110 3/8 id x 100 ft Red
210112 1/2 id x 100 ft Red
210114 3/4 id x 50 ft Red
210116 1 id x 50 ft Red
210118 1-1/4 id x 50 ft Red
210120 1-1/2id x 50 ft Red
210140 3/8 id x 100 ft Black
210142 1/2 id x 100 ft Black
210144 3/4 id x 50 ft Black
210146 1 id x 50 ft Black
210148 1-1/4 id x 50 ft Black
210150 1-1/2id x 50 ft Black

Available in master rolls, Heatshield Products Fire Shield Sleeve™ provides thermal and physical protection against excessive heat with its rugged silicone covering.This fuel line heat shield tubing starts with braided fiberglass yarns in a flexible substrate, then is coated with a high-grade silicone rubber. This rugged silicone coating makes the Fire Shield Sleeve™ resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to abrasion and fraying. You can use Fire Shield Sleeve™ for brake lines, fuel lines, wiring harnesses and cables, making master rolls a must-have for any hot rod and race car shop. The rugged silicone coating also makes Fire Shield Sleeve™ ideal for protecting welding lines and cables. This oil line heat sleeve is designed to reduce and dissipate heat, and works great in harsh environments that require thermal protection and insulation. This heat sleeve fuel line withstands 500 degrees F continuous and brief intervals of 900 degrees F, and allows for the bundling of wires, hoses and cables.

Heatshield Safety Image


Required equipment: safety glasses, dust mask, gloves, scissors or utility knife

Pretty easy, just cut to length!

Pro Tip: Compress or “bunch” the sleeve length wise, and stretch the opening of the sleeve then slide over. It may also help to coat fitting or terminal with silicone or dry graphite spray before sliding over. To decrease the id of sleeve after it slides over fitting/terminal pull on both ends of the sleeve to stretch the length.

MSDS | Specification Sheet | Brochure


Insulation Type: Dissipates heat


AN SLEEVING CALCULATOR


Disclaimer:

The following conversion is a guide for AN hoses only. The conversion reflects the most common conversions for AN hose sizes, however there may be some variances with different manufactureres. Always double check by measuring the OD of your hose. Always verify the OD of your hose, you may use a caliper or sliding an open end wrench over the hose. If you are still unsure verify with the manufacturer of the hose as to their specific OD. By using this calculator you acknowledge this is a guide only and it is ultimately your responsibility to verify the correct OD of your AN line.

ENTER AN HOSE SIZE WITHOUT DASH:

:

RESULTS:

 

:

:

:

More information coming soon!

Brake Line Heat Shield, Oil Line Heat Shield, Fuel Line Heat Shield

heatshieldproducts (844) 723-2665