Industrial Heatshield Armor

Industrial Heatshield Armor

  • Images
  • Videos








  • Reduces radiant heat by 60%

  • 0.003” thick armor layers, can be cleaned after installation

  • Simple installation, install in minutes!

  • The ideal heat shield insulation for your down pipe, DPF, or high performance application

  • Custom stamped shapes and rolls available, tooling charges and minimums apply

  • Made in the USA

Part No Description
HD17502 0.50 thk x 12 in x 4 ft
HD17504 0.50 thk x 12 in x 5 ft
HD17512 0.50 thk x 18 in x 4 ft
HD17513 0.50 thk x 18 in x 5 ft
HD17514 0.50 thk x 18 in x 10 ft
HD17521 0.50 in thk x 24 in x 5 ft
HD17523 0.50 in thk x 24 in x 10 ft
HD17532 0.50 thk x 3 ft x 4 ft
HD17535 0.50 thk x 3 ft x 25 ft
HD17545 0.50 thk x 4 ft x 25 ft

Exhaust pipe heatshield can reduce radiant heat from your GenSet exhaust pipe by 60%. The outer armor of this exhaust heat shield allows it to be cleaned after installation, gives it a long lifespan, and also makes Heatshield Armor resistant to the elements. In addition, it makes it safe for workers to contact in brief intervals. The inner BioCool liner makes it capable of withstanding 1800°F continuous, which allows this heat shield to be placed directly on exhaust system, turbo manifolds, down pipes, DPF (check with state regulations regarding usage on DPF), and other tier 4 exhaust.

In addition to being an industrial exhaust heat shield, Heatshield Armor is an excellent insulation solution to retain heat inside ducting or pipes. This can improve your energy efficiency and keep your manufacturing process running smoothly. It prevents loss of thermal energy in fluids and can also reduce nearby temperatures so it is safe for factory workers to be around the pipes or ducting. The retained heat inside the pipe or duct system can also decrease energy costs by keeping the heat where it belongs and not radiating out to the rest of your production facility.

This heat shield is flexible, easy to cut, and install. It is a great hybrid between custom made exhaust jackets and universal wraps - making it an economical yet heavy duty power gen heat shield! Another advantage over an all alloy exhaust heat shield, you do not get the hot side to cold side heat conduction, because there is no metal contact layer on your genset exhaust! Heatshield Armor can even be repaired with one of our Heatshield Armor Weld tapes!

SDS | Specification Sheet | Brochure

Insulation Type: Insulator - Designed to be put directly on heat source to keep in



This calculator is a tool to estimate how much exhaust heat shield wrap you will need for your exhaust system. Calculations are a guide only! While this calculator is very accurate, results will vary on installation of Heatshield Armor. By using this calculator your agree that this is a guide only and that actual useage may vary.

Guide for calculator usage:

All fractions should be in decimal form, for example:

  • 1/8 should be 0.125
  • 1/4 should be 0.250
  • 1/2 should be 0.500
  • 3/4 should be 0.750
  • 7/8 should be 0.875


1/4" is reccomended for naturally aspirated automotive applications and powersports. 1/2" thickness is recommended for all forced induction automotive, heavy duty, genset and industrial applications.

Enter Exhaust Component Dimensions





* Required fields



Can your industrial Heatshield Armor be painted to match after installation?

Yes. Any high temperature paint suitable for metal will work fine. You should be able to get high temperature engine or exhaust paint available at any local heavy duty parts dealer.

Applications for Heatshield Armor on:

  • GenSet Exhaust Systems
  • Industrial Oven Chimneys
  • Heat Retention for Fluid lines
  • Weather exposed exhausts

heatshieldproducts (844) 723-2665