Industrial Stainless Locking Ties

Generator Exhaust Insulation Fasteners - HD Thermal-Tie

Features:
  • Continuous operating temperature of 1800°F

  • 316 stainless steel locking ties

  • 0.010" thick

  • The heavy duty tie features 45% more gripping power

  • Great for heavy duty applications

Sku Description UPC
HD35114 5/16 w x 10 in (25 Pack) 819825017199
HD35115 5/16 w x 10 in (50 Pack) 819825017007
HD35118 5/16 w x 20 in (25 Pack) 819825017205
HD35119 5/16 w x 20 in (50 Pack) 819825017212
HD35120 5/16 w x 33 in (25 Pack) 819825017236
HD35121 5/16 w x 33 in (50 Pack) 819825017229
HD35122 5/16 w x 47 in (25 Pack) 819825017939
HD35123 5/16 w x 47 in (50 Pack) 819825017120

Industrial strength zip ties are the easiest and best way to fasten any type of high temperature insulation on an exhaust system. Stainless steel zip ties can also be used in any application where high strength fastener is needed. Easy to use; no bands or buckles required! Simply pull the tail end through the head and tighten, just like plastic wire ties. There are no sharp edges and are easy to handle. The low profile makes stainless cable ties ideal for any tight fit application. 316 stainless steel tie, with 45% more gripping power than most ties available on the market!. Thermal Ties have a thickness of .010-inch.

Required equipment: gloves, needle nose pliers, and diagonal pliers

  • Identify the tail and heat of the stainless steel locking tie (Figure 1)
  • Wrap tie around components to be secured, and push tail through the head (Figure 2)
  • Pull tail through head (Figure 3)
  • Use needle nose pliers to coil or wind the tie into itself (Figure 4)
  • Use diagonal pliers to cut of excess (Figure 5)

Install Stainless Locking Tie

Write Your Own Review
You're reviewing:Industrial Stainless Locking Ties
Your Rating
To Top