Heatshield Armor - Universal Marine Exhaust Heat Shield

Marine Heatshield Armor

More Views

1800°F

982°C

CONTINUOUS

2200°F

1204°C

Intermittent

FEATURES:

  • Continuous operating temperature of 1800°F, 2200°F intermittent

  • Reduces radiant heat by 60%

  • 0.003” thick armor layers, can be cleaned after installation

  • Simple installation, install in minutes

  • Custom stamped shapes and rolls available, tooling charges and minimums apply

  • Made in the USA

Part No Description
175103 0.50 thk x 12 in x 3 ft
175105 0.50 thk x 12 in x 5 ft
175111 0.50 thk x 18 in x 5 ft
175115 0.50 thk x 18 in x 10 ft
175202 0.50 thk x 2' Wide x 2ft
175304 0.50 thk x 36 in Wide x 4ft
175325 0.50 thk x 36 in x 25 ft

Up armor your exhaust heat shield insulation with Heatshield Armor in your marine vessel. Heatshield Armor can reduce radiant heat from your exhaust pipe by 60%. These ceramic heat shields can cause a significant reduction in radiant heat from entering the engine room, keeping it cooler, & preventing heat from radiating into other areas of your ship. The outer armor of this exhaust heatshield material allows it to be cleaned after installation, gives it a long lifespan, and also makes Heatshield Armor resistant to abrasion. The inner ceramic liner makes it capable of withstanding 1800°F continuous, which allows this heat shield to be placed directly on turbo manifolds, down pipes, and exhaust pipes. It is flexible, easy to cut and install. This is a very cost effective solution to the custom made exhaust insulation jackets commonly found in marine vessels.


Meets Coast Guard Spec. 164.009 for Incombustible Materials

SDS | Specification Sheet | Brochure


Insulation Type: Insulator - Designed to be put directly on heat source to keep in


HEATSHIELD ARMOR CALCULATOR

Disclaimer:

This calculator is a tool to estimate how much exhaust heat shield wrap you will need for your exhaust system. Calculations are a guide only! While this calculator is very accurate, results will vary on installation of Heatshield Armor. By using this calculator your agree that this is a guide only and that actual useage may vary.

Guide for calculator usage:

All fractions should be in decimal form, for example:

  • 1/8 should be 0.125
  • 1/4 should be 0.250
  • 1/2 should be 0.500
  • 3/4 should be 0.750
  • 7/8 should be 0.875

SELECT ARMOR THICKNESS:

1/4" is reccomended for naturally aspirated automotive applications and powersports. 1/2" thickness is recommended for all forced induction automotive, heavy duty, genset and industrial applications.

Enter Exhaust Component Dimensions

:

:

:

:

* Required fields

RESULTS:

 

Use Marine exhausts heat shield on:

  • Replace worn out exhaust jackets
  • Turbos
  • Turbo manifold
  • Exhaust pipes
  • Exhaust flanges

heatshieldproducts (844) 723-2665