Marine Exhaust Wrap

Marine Exhaust Wrap

More Views

1200°F

649°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Reduces engine room temperatures up to 50%

  • All rolls 1/16” thick

  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product

  • Made in the USA

Part No Description
312050 2 in x 50 ft Roll
312100 2 in x 100 ft Roll
312104 4 in x 100 ft Roll
312106 6 in x 100 ft Roll

Marine exhaust wrap is designed to be wrapped around your marine exhaust system. Black exhaust wrap also reduces radiant heat damage and can lower engine room temperatures by as much as 50%. This high temp exhaust wrap can withstand 1200°F continuous and 2000°F intermittent. It may be fastened with Thermal-Tie, hose clamps, or wire. Our marine exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Marine exhaust wrap is noncombustible and it is also water and fungus resistant.

  • 3" wide rolls recommended for exhaust OD's of 4" or more.
  • 4" wide rolls recommended for exhaust OD's of 5" or more.
  • 6" wide rolls recommended for exhaust OD's of 6" or more.

How much exhaust wrap do you need for your vessel's engine room? Click here and select the 50/50 overlap option on our exhaust wrap calculator


Download Exhaust Wrap Instruction Sheet


MSDS | Specification Sheet | Brochure | Brochure (printer friendly)


Insulation type: Insulator, retains heat in

Material: Fiberglass, Vermiculite thermal coating

Header and Exhaust Wrap Calculator

DISCLAIMER:

This calculator is a tool to estimate how much exhaust header wrap you will need for your headers, downpipe, or exhaust system. Calculations are a guide only! Actual usage will vary depending upon installation. Tighter installation of exhaust wrap on the pipe results in smaller header wrap needed.

GUIDE FOR CALCULATOR USAGE:

All fractions should be in decimal form:
  • 1/8 should be 0.125
  • ¼ should be 0.250
  • ½ should be 0.500
  • ¾ should be 0.750
  • 7/8 should be 0.875

RECOMMENDED WIDTHS:

  • ¾"- 2" pipe OD use 1" wide wrap
  • 1¾"- 4" pipe OD use 2" wide wrap
  • 3"- 4" pipe OD use 2" or 3" wide wrap
  • 4"- 5" pipe OD use 2", 3" or 4" wide wrap
  • 5"+ pipe OD use 3", 4" or 6" wide wrap

SELECT OVERLAP OF EXHAUST WRAP:

¼" Overlap is recommended for automotive applications, a 50% overlap is recommended for all motorcycle, UTV, kart, marine, heavy duty and industrial applications.

ENTER EXHAUST COMPONENT DIMENSIONS:

* Pipe diameter in inches
* Pipe length in feet
Number of bends less than 45°
Number of bends greater than 45°
* Required field

Results

Feet of 1" exhaust wrap needed:
25' rolls 50' rolls 100' rolls
Feet of 2" exhaust wrap needed:
15' rolls 25' rolls 50' rolls 100' rolls
Feet of 3" exhaust wrap needed:
100' rolls
Feet of 4" exhaust wrap needed:
100' rolls
Feet of 6" exhaust wrap needed:
100' rolls

heatshieldproducts (844) 723-2665