Thermal Tie - Stainless Steel Locking Ties

Stainless Stell Locking Ties

  • Images
  • Videos

1800°F

982°C

CONTINUOUS

2000°F

1093°C

Intermittent

FEATURES:

  • Continuous operating temperature of 1800F

  • 304 and 316 stainless steel locking ties

  • 0.010" thick

  • The heavy duty tie features 45% more gripping power

Part No Description
350008 3/16 w x 8 in 8 Pack
350009 3/16 w x 8 in bag of 50
350010 3/16 w x 10 in 6 Pack
350011 3/16 w x 10 in bag of 50
350014 3/16 w x 14 in 4 Pack
350015 3/16 w x 14 in bag of 50
350020 3/16 w x 20 in 6 Pack
350021 3/16 w x 20 in bag of 50
350033 3/16 w x 33 in 2 Pack
350034 3/16 w x 33 in bag of 50
351001 5/16 w x 8 in 8 Pack
351002 5/16 w x 8 in bag of 50
351003 5/16 w x 10 in 6 Pack
351004 5/16 w x 10 in bag of 50
351005 5/16 w x 14 in 4 Pack
351006 5/16 w x 14 in bag of 50
351007 5/16 w x 20 in 6 Pack
351008 5/16 w x 20 in bag of 50
351012 5/16 w x 33 in 2 Pack
351013 5/16 w x 33 in bag of 50

Heatshield Products stainless steel Thermal-Tie™ is the easiest and best way to fasten any type of high-temperature thermal-barrier product. Use header wrap ties any high-heat application where high-strength fasteners are needed. It is easy to use, and no special tools nor bands or buckles required. Simply pull the tail end through the head and tighten, just like with plastic wire ties. There are no sharp edges and it is easy to handle. The low profile makes it ideal for any tight-fit application. Available as a 3/16-inch-width 304 stainless steel metal tie wrap, or heavy-duty 5/16-inch-wide 316 stainless steel header wrap ties with 45 percent more gripping power. Both come in a variety of lengths to suit multiple applications and have a thickness of .010 inch.

Required equipment: gloves, needle nose pliers, and diagonal pliers

  • Identify the tail and heat of the stainless steel locking tie (Figure 1)
  • Wrap tie around components to be secured, and push tail through the head (Figure 2)
  • Pull tail through head (Figure 3)
  • Use needle nose pliers to coil or wind the tie into itself (Figure 4)
  • Use diagonal pliers to cut of excess (Figure 5)

Install Stainless Locking Tie

MSDS | Specification Sheet | Brochure

More information coming soon!

Use stainless steel locking ties on:

  • Exhaust wrap
  • Turbo manifold wraps
  • Exhaust heat shields
  • Air intake heat shields
  • Heat shield sleeving

heatshieldproducts (844) 723-2665