Lava Header Armor - Carbon Fiber Look Exhaust Heat Shield

Manifold Exhaust Heat Shield

  • Images
  • Videos

1800°F

982°C

CONTINUOUS

2200°F

1204°C

Intermittent

FEATURES:

  • Header Armor is easily trimmed and wrapped around headers

  • Heatshield exclusive BioCool™ technology

  • Compliant with most header manufacturer's warranties

  • Kits include Inconel HP Tie Wire for installation

  • Made in the USA

Part No Description
177804 1/4 in thk x 18 in x 24 in
177805 1/4 in thk x 18 in x 24 in (x2)
177814 1/2 in thk x 18 in x 24 in
177815 1/2 in thk x 18 in x 24 in (x2)

When we introduced Header Armor™, it revolutionized the way people thought about header wraps. Now our Lava Header Armor™ brings the great looks of Lava Shield™ to this innovative product line. Made from crushed volcanic rock, Heatshield Products Lava Shield™ has heatshielding capabilities with a carbon-fiber look.

Lava Header Armor™ helps your engine produce more power by keeping more heat in your headers and exhaust system. That in turn increases exhaust gas temperatures and exhaust gas velocity for improved exhaust flow and efficiency for scavenging and other factors.

Unlike header wraps, which completely cover individual header tubes, the Lava Header Armor™ is a single shield (or made by the user into multiple) that covers one half of the primary tubes. This header heat shield stops 50 percent more heat from the exhaust system. By covering one side of the header you are reducing more under hood heat and still allowing the primary tubes to breathe. As a result, it will not void most header corrosion warranties creating a win-win situation. More heat reduction than traditional exhaust header wraps in a warranty friendly method because the pipes can breathe.

Lava Header Heat Shield significantly reduces underhood heat, which can help protect wiring and fuel lines, and allow your car to run cooler. Underhood temperatures can drop as much as 70 percent which results in lower air intake temperatures giving you more power.

The specially formulated BioCool™ thermal-barrier material is one of the most efficient thermal-barrier materials on the market, keeping heat where it should be while not having the itchy and heavy smoke drawbacks of less capable fiberglass-based materials.

This combines for a sustained temperature rating of 1,800 degrees Fahrenheit and intermittent temperature rating of 2,200 degrees Fahrenheit to make the Lava Header Armor™ one of the most effective thermal barriers you can buy. Its design makes installation a breeze, and you will not need to remove the headers. The Lava Header Armor™ can be removed and reinstalled as needed for maintenance and engine work.

Download Header Armor Instruction Sheet


If you are not going to cover the collector on the header, you must stop the Header Armor 6 inches from the collector. Heatshield Products Strongly recommends you cover one entire side of your header or manifold including the collector. Failure to do so will cause some portions to cool more quickly than others. This can result in separations at the welds on the collector.

Covering one entire side (collector included) of the header will ensure long header life and should remain in compliance with most manufacturer’s warranty policies.


SDS | Specification Sheet | Brochure


Insulation Type: Insulator - Designed to be put directly on heat source to keep in

Use Header Armor on:

  • Headers
  • Turbo manifold
  • Exhaust manifold

heatshieldproducts (844) 723-2665