Heat Shield Tape and Fasteners

Stainless steel locking ties are the perfect high temperature solution to secure your exhaust insulation. Heat shield tape can be used to shield over 90 percent of radiant heat. If you need to secure or tape up insulation, heatshield Products have you covered. Browse the full line up of heat shield tape and fastenrs for your every need.

9 Item(s)

  1. Thermaflect Tape

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Thermaflect Tape™ reflects up to 90 percent of radiant heat away from wires, lines, cables and hoses, protecting them from ambient heat, and it withstands 1,100 degrees F continuous radiant heat (requires minimum of 1 inch airspace) and 500 degrees F of direct contact

    • Capable of reducing up to 90% of radiant heat

    • Adhesive backing sticks to almost any clean surface

    • Helps shield fuel lines, brake lines, wire looms, and more from radiant heat

    • Bulk rolls and custom widths available, minimums apply

    • Made in the USA

    Learn More
  2. Cold-Gold Tape

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Cold-Gold Tape™ was specially designed to shield radiant heat, as well as look like the kind of show-quality material
    • Capable of reflecting up to 90% of radiant heat

    • Exclusive TruGold™ technology superior to “birthday balloon” gold materials

    • Specially formulated fiberglass-based backing material also acts as a fire barrier for extra protection

    • Cuts easily with scissors or utility knife

    • All rolls 0.008” thick

    • Made in the USA

    Learn More
  3. Heatshield Armor Tape

    1100°F

    593°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Heatshield Armor Tape™ is used to repair Heatshield Armor or HP Sticky Shield™. It may also be used on tight seams of Heatshield Armor as a cosmetic improvement.

    • Reflect heat away

    • Also used to seal and repair Heatshield Armor and HP Sticky Shield

    •  0.003" thick

    • Made in the USA

    Learn More
  4. Thermal-Tie

    1800°F

    982°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Heatshield Products stainless steel Thermal-Tie™ is the easiest and best way to fasten any type of high-temperature thermal-barrier product.

    • Continuous operating temperature of 1800F

    • 304 and 316 stainless steel locking ties

    • 0.010" thick

    • The heavy duty tie features 45% more gripping power

    Learn More
  5. HP Tie Wire

    2000°F

    1093°C

    CONTINUOUS

    2400°F

    1316°C

    Intermittent

    Secure your cool with Heatshield Products Tie Wire™. Use this wire heat shield to secure insulation in hostile high-heat environments.

    • Perfect for turbo heat shields

    • Secures exhaust wrap

    • Easier to use than the locking ties

    • Made in the USA

    Learn More
  6. HP Racers Tape

    450°F

    232°C

    CONTINUOUS

    600°F

    316°C

    Intermittent

    HP Racer's Tape is a self-emulsifying silicone tape that provides rugged heat protection.

    • Rated for 450°F continuous use, 600°F intermittent.

    • Reflects and dissipates heat

    • Protects wire looms, fuel lines, without disassembly

    • Guide line for easy installation

    • Made in the USA

    Learn More
  7. Cool Foil Tape

    1000°F

    538°C

    CONTINUOUS

    2000°F

    1093°C

    Intermittent

    Cool Foil Tape™ is a lightweight thermal-insulating tape that reflects radiant heat away from wires, lines, cables and more on your car, 4x4, motorcycle or just about anything.

    • Continuous operating reflective temperature of 1000°F

    • Capable of reducing up to 80% of radiant heat

    • Adhesive backing sticks to almost any clean surface

    • Helps shield fuel lines, brake lines, wire looms, and more from radiant heat

    • Bulk rolls and custom widths available, minimums apply

    • Made in the USA

    Learn More
  8. HP Shrink

    HP Shrink is extra flexible making them ideal to seal off any high temperature sleeve!
    • Very flexible polyolefin tubing

    • Seals ends of heat sleeve for maximum efficiency

    • Has a 3:1 shrink ratio

    • Meets all AMS-DTL-23053/5C, UL and CSA specifications

    • Made in the USA

    Learn More
  9. HP Thermal Spring

    1800°F

    982°C

    CONTINUOUS

    2200°F

    1204°C

    Intermittent

    HP Thermal Springs can be used to hold your turbo heat shield or manifold shield in place. Constructed of 302 stainless steel they are rugged, handle high heat and are high strength! Use needle nose pliers to stretch spring on lacing hook.

    Learn More

9 Item(s)

Since we are a true heat shield protection company, why not offer a full line of heat shield tapes and fasteners for your heat shield and exhaust wrap? We proudly make our products right here in the USA so you can be sure when you stick our tape it sticks.

Thermaflect tape – This is a rugged universal heat shield tape. It serves many useful purposes from shielding air intake to protecting hoses and wire looms. Highly tack adhesive sticks to just about every clean smooth surface around. With a 1-inch air gap, this thermal insulation tape can reflect over 90% of radiant heat away.

Cool Foil Tape – this heat shield foil tape is an economical alternative. Not only can it reflect heat, but it can also be used to make other heat shield insulation even better. Using this heat insulating tape on the ends of a heat shield sleeve can significantly improve the effectiveness of the high temperature sleeve.

Thermal-tie – The industries original locking tie. Made from high temperature stainless steel, our licking ties can be secured without goofy tools. Just cinch that exhaust wrap down on your header without original width ties. Our heavy duty wide locking ties offer 45% more gripping power, making them a great way to fasten that heat shield onto your exhaust pipe.

HP Shrink – You’ve been asking for it, so we finally did it. Additional heat shrink in a variety of diameters to help seal off and improve the performance of your heat shield sleeve. Let the world know you use quality products to protect and keep your car cool.

HP Tie Wire- Small spools of high temperature wire for your exhaust wrap. HP Tie Wire can also be used to secure your turbo heat shield. Made from high temperature Inconel, HP Tie Wire can keep your wrap secure in the hottest of environments.

HP Racer’s Tape – This self-sticking silicone heat shield tape is a great way to protect wires. It can make a wire harness water proof in addition to being used at the track or on the road for some temporary repairs.

Whether you need to shield that CAI or keep your header wrap secured to your pipes, heat shield tape and fasteners by Heatshield Products will get the job done.

heatshieldproducts (844) 723-2665